Ring Hammer Crusher
This series of hammer crushers has a rottor that is fitted with a specially designed ring-hammer. It is suitably used to crush materilas such as coal, gauge, coke, slay, shale, loose lime stone, red sandstone, among others. The compressive resistance of the material to be crushed should not be more than 10Mpa and the surface moisture content be less than 8%.
BRN Torsional ring load cell
Execution standard:
GB/T 7551-1997 Certificate
(eqv OIML R60)
Combined error: 0.015%
Sealed to IEC 529:
Protection grade: IP67 or IP68.
Protection against total immersion in water for 30 minutes at a pressure corresponding to a 1 m head of water.
Dimensions
(In mm. 1mm = 0.03937 inches)
BRN Torsional ring load cell
ball slewing ring
OUR FACTORY CAN PRODUCE AS PER CUSTOMER DESIGN OR AS PER CUSTOMER TYPES OF INTERNATIONAL SPECIFICATION.
SINGLE ROW SLEWING RING
DOUBLE ROW SLEWING RING
THREE ROW SLEWING RING
FOUR POINT CONTACT SLEWING RING
WITH TEETH OR WITHOUT TEETH.
Ring Forged
1) Hot forged ring, seamless
2) Material: Carbon steel, stainless steel and alloy steel
3) Material standard: GB, ASTM, ASME, AISI, API, DIN, UNI, BS
4) Delivery condition: Rough machining or finish machining
5) Customer's designs welcomed
O-Ring chain
Transmission chain also named driving chain,it is one kind of roller chains.It is used for driving engine,sprocket or other machines.We use high quality materials and heat-treated to ensure wear life.
Snap Ring
our needle roller bearing are used widely in auto industry, and profeesional matching for Hyundai company of Korea....
Piston ring-Seal ring
Piston ring plays a role of sealing, so it is also called seal ring. The common material for piston ring is alloy cast iron or nodular cast iron, such as QT60-2. Sometimes, it also uses high quality carbon structural steel, such as 65Mn.
Ferrite Radial-oriented Multipole Magnetic Ring
We produce ferrite radial oriented multipole magnetic rings according to automobile features with hundreds of different specifications
flexible graphite ring
WEALSON Flexible Graphite Ring,by pure flexible graphite through molded made lined metals, reinforced material stainless steel foil, net. To prevent the fill material has been slow oxidation, with stainless steel cap design is necessary. In general, the cross-section for the square packing rings, but also for the wedge-shaped or V-shaped.
Ring Joint Gasket
Junioseal Ring joint gasket are made in accordance with API 6A, and in solid metal like soft iron/SS304/316/321 and alloy items.
slewing ring
We can manufacture slewing bearing as below:
1,4 points contact ball slewing ring
2,Ball slewing ring with flange ring
3,Roller slewing ring
4,Roller/ball combination slewing ring
5,Cross roller slewing ring
6,Triple row roller slewing ring
7,Other special slewing ring as per customer's requirement
Inner Ring
The inner ring is used as the rollway of roller bearing. It is the common free gap when it is used in combination with needle roller bearing and has the changeability.
RTJ Flanges, Ring Type Joint Flange
Ring Type Joint Flange is a method of ensuring leak proof flange connection at high pressures. A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal. This jointing method can be employed on Weld Neck, Slip-on and Blind Flange.
SHFO-TYPE RING ANCHOR
material
* carbon steel plated
characteristic
* Protruding point on the pipe designed for avoiding pipe rotation， so can be used as concrete anchor and in deep depth.
* inside empty concrete also can be used.
purpose
* Fix the droplight,etc.
