ST series generators are mainly designed to serve as power generating unit for lighting purpose in ships, towns or villages and house-hold electrical appliances. The construction of the generators is drip-proof type, IP21, salient-pole rotating field self excitation and constant voltage type. The generator interior is made of high quality magnetic and electrical materials. Insulation for stator and rotor is class B or F. The generators are elegant in appearance, tight in construction and easy maintenance. IEC standard are adopted on dimension, which are suitable for using in Australia, Europe, America and other countries with the end covers to be model B. The generators are made as per standard JB/T3320-2000. And in conformity to IEC34-1. STC series generators are used in towns, countryside, construction-site, mountain area and pastures as electric power source for lighting purpose and three phase AC power supply; it can also be reserved as emergence power source. The generators are drip-proof with rotary field type, IP21, Insulation Class: B or F, adopting harmonic excitation system, safe and reliable using, easy operation and maintenance. The generators are three-phase, four-wire type, and adopting star connection with neutral point. The rated line voltage is 400V, phase voltage 230V, frequency 50HZ, power factor 0.8(lag). We can provide 60HZ and the other voltage of generator according to the customer’s request. They can be coupled with a prime mover directly or through v-belt making right or reverse continuous rotation at the rated speed. When the rotation speed of prime mover changes 3% or so and load varies in the range of 0-100% Cos 0.8-1.0, the generators offer constant voltage, when sudden change (increase or decrease) of load, the generator will soon return to their normal working state, at the same time, without any starting device the generator can directly start an unloaded squirrel cage induction motor. The generators are made as per standard JB/T8981-1999 and in conformity to IEC34-1.

1.Any permanent magnetic generators, providing invariable excitation on all occasions. 2. Easy to be connected with power network or other generators. Standard 2/3 pitches windings check excessive midline current. 3. Balanced rotor with single or two sealed ball bearings 4.Convenient installation and maintenance with easy access to terminals, rotating diodes and coupling bolts 5.Wide range of Flange adaptor and single bearing coupling disc 6.Meet leading standards

1.Easy to be connected with power network or other generators. Standard 2/3 pitches windings check excessive midline current. 2.Balanced rotor with single or two sealed ball bearings 3.Convenient installation and maintenance with easy access to terminals, rotating diodes and coupling bolts 4.Wide range of Flange adaptor and single bearing coupling disc.

TWG series three-phase brushless synchronous generators, by introducing and developing on foreign on foreign advanced technology of well-known generators, are our newly developed products. Its body is constructed by steel shell and rotor is made as whole salient pole type with full damping, with brushless self exciting method and automatic controlling by AVR. It has following features: small-size, light-weight, good appearance and perfect performance.

TZH series generators are made as per standard JB/T8981-1999. And in conformity to IEC34-1. Protection class: IP21 Insulation class B or F. The rotor structure is concealed type. Performance is more reliable. TZH series generators have five advantages comparing with STC series generators: Compound excitation, simple circuit, high reliability, easy maintenance, excellent dynamic characteristics, when load or unload suddenly, the circuit’s light will not twinkle.Strong starting system, even the motors only with its 70% capacity volume can be directly started and the switch will not trip. Approaching sine voltage wave and regulated power supply, output voltage can be safely used on computers. The deviation of the 3-phase line voltage will be less than 3% when the generators undertake unbalanced loading.

Closed water-cooled,in line,4-stroke,wet cylinder liner,direct injection. ntake Type Natural No.of Cylinder 3.L Bore×Stroke(mm) 77×81 Piston Speed(m/s) 6.35 Compression Ratio 16.5:1 Mechanical Governor Rate ≦5% Electronic Governor Rate ≦1% Noise Level (dBA) 76 Exhaust Temperature(°C) 368 Lub oil Capacity(L) 4.9 Rated Fuel Consumption(L/h) 2.9

Closed water-cooled,in line,4-stroke,wet cylinder liner,direct injection Intake Type Natural No.of Cylinder 4.L Bore×Stroke(mm) 84×100 Piston Speed(m/s) 6.35 Compression Ratio 16.5:1 Mechanical Governor Rate ≦5% Electronic Governor Rate ≦1% Noise Level (dBA) 76 Exhaust Temperature(°C) 445 Lub oil Capacity(L) 10.6 Rated Fuel Consumption(L/h) 5.4

Closed water-cooled,in line,4-stroke,wet cylinder liner,direct injection. Compression Ratio 16.5:1 Mechanical Governor Rate ≦5% Electronic Governor Rate ≦1% Noise Level (dBA) 76 Exhaust Temperature(°C) 445 Lub oil Capacity(L) 10.6 Rated Fuel Consumption(L/h) 5.4

Closed water-cooled,in line,4-stroke,wet cylinder liner,direct injection Rated Power(kW) 30 Intake Type Natural No.of Cylinder 3.L Bore×Stroke(mm) 105×127 Piston Speed(m/s) 6.35 Compression Ratio 16.5:1 Mechanical Governor Rate ≦5% Electronic Governor Rate ≦1% Noise Level (dBA) 88 Exhaust Temperature(°C) 500 Lub oil Capacity(L) 8.3 Rated Fuel Consumption(L/h) 7.1

Closed water-cooled,in line,4-stroke,wet cylinder liner,direct injection. Rated Power(kW) 32 Intake Type Natural No.of Cylinder 3.L Bore×Stroke(mm) 105×127 Piston Speed(m/s) 6.35 Compression Ratio 16.5:1 Mechanical Governor Rate ≦5% Electronic Governor Rate ≦1% Noise Level (dBA) 98 Exhaust Temperature(°C) 515 Lub oil Capacity(L) 7 Rated Fuel Consumption(L/h) 7.8